Fede Cocina

Kitchen science

Why Do You Have to Hold the Gas Oven Knob Down to Light It?

By 5 min readUpdated

In short

You have to hold down a gas oven knob because a safety valve shuts off the gas when there's no flame. A thermocouple holds that valve open: two metals that, heated by the flame, produce 25 to 35 millivolts. That current can hold the valve open but can't open it, so your finger does that until the thermocouple heats up, about 10 to 15 seconds.

You turn the knob, press it in, the spark clicks, the flame lights... and if you let go right away, it goes out. So you stay crouched in front of the oven, finger pressing, counting under your breath.

It feels like the oven being difficult, but it's the opposite: it's a pretty clever safety system. And it has one part that doesn't come in the box: you.

What does the gas oven safety valve do?

Picture an oven with no protection at all. You light the burner, a draft blows out the flame, and gas keeps flowing into a closed box without anyone noticing. An oven full of gas is exactly what nobody wants near a spark.

That's why modern gas ovens have a safety valve. The manual for Orbis stoves (an Argentine brand) explains it this way: if the oven burner or the stovetop burners go out for any reason, that valve completely shuts off the gas.

The thermocouple: metal that makes electricity from fire

To know whether there's a flame, the oven uses a thermocouple. It's a sensor made of two different metals joined at the tip. When the tip heats up, a tiny voltage appears between the two metals: 25 to 35 millivolts. To give you an idea, a regular AA battery puts out 1.5 volts, about 50 times more.

That tiny current travels to the valve and magnetizes a U-shaped iron core, an electromagnet. The magnet holds the gas passage open as long as there's a flame.

If the flame goes out, the thermocouple tip cools, the current stops, the magnet lets go, and the valve closes on its own. No flame, no gas. That simple.

Why do you have to hold the knob down?

Here's the chicken-and-egg problem. To get a flame, you need gas. For gas to flow, the valve has to be open. To keep it open, you need current. And to get current, you need a flame.

On top of that, the current is so small that it can hold the valve open, but it can't pull it open. Someone has to open it by hand. That someone is you: pressing the knob pushes the valve open and keeps it there while the flame heats the thermocouple.

Once the tip is hot enough, the magnet can do the job on its own. Only then can you let go. If you let go too soon, the thermocouple hasn't reached temperature yet, the magnet can't hold, and everything goes out.

How long should you hold the oven knob?

The Orbis manual says that once the burner lights, you should keep the knob pressed for 10 to 15 seconds: that's the time the safety valve needs to engage. Each brand may ask for a different time, so check the manual for yours.

What to do if the oven won't light or goes out

If you press and it doesn't light, don't keep trying with gas flowing. Orbis says to stop pressing, open the oven door, and wait at least 1 minute before trying again.

If it lights but goes out every time you let go, even after waiting the full 15 seconds, the problem is usually the thermocouple:

What happensPossible cause
The tip ended up outside the flameThe flame should wrap around roughly the top centimeter (3/8 to 1/2 in) of the thermocouple
The flame is yellowThe burner is dirty: a healthy flame is blue
It goes out even with everything in placeThe thermocouple is worn and puts out less voltage than the magnet needs

In all three cases, the right move is to call a licensed gas technician. Technicians test it with a meter: according to HeatingHelp, in an open-circuit test it should read above 17 to 18 millivolts. And when the flame goes out, you can hear the magnet click as it lets go.

If you smell gas

Pure natural gas has no smell: utilities add one on purpose, that rotten-egg odor, so you'll notice a leak. If you smell it, Illinois emergency management recommends:

  • Get out of the house quickly with everyone, pets included.
  • Don't use any open flame: no candles, matches, or lighters.
  • Don't touch light switches or outlets, and don't use phones or appliances.
  • Open doors and windows only if you can do it quickly and easily.
  • Don't go looking for the leak.
  • Call your gas utility from a spot where you no longer smell gas, and call 911 if there's immediate danger.

Next time you're crouched there counting to 15, you'll know what's going on: the flame is heating a piece of metal that makes electricity, and your finger holds the valve until the magnet can do it alone. And if things then burn on the bottom, that's a different problem: the rack.

Frequently asked questions

How long do you hold the gas oven knob down?

On Orbis stoves, 10 to 15 seconds after the burner lights. Other brands may ask for a different time, so check your manual.

Why does my gas oven go out when I let go of the knob?

Because the thermocouple hasn't heated up enough to hold the valve open. If it always happens, even after waiting, it may be outside the flame, the burner may be dirty, or it may be worn out: a technician should check it.

What is an oven thermocouple?

A sensor made of two different metals joined at the tip. Heated by the flame, it produces 25 to 35 millivolts, which keep the gas valve open.

What should I do if my gas oven won't light?

Stop pressing the knob, open the oven door, and wait at least 1 minute before trying again.

Do electric ovens have a safety thermocouple too?

Not this kind: they don't use gas, so there's no valve to shut off. This system is for gas ovens and gas burners.

Sources

The facts in this post come from these sources (checked when it was written).

  1. Manual de instrucciones, cocinas 938 — Orbis
  2. Thermocouple Testing Procedure — HeatingHelp
  3. How does this flame failure device work? — Model Engineer (foro, respuesta de Clive Steer)
  4. What is a Thermocouple? — Cooker Spare Parts
  5. Gas — Ready Illinois (Illinois Emergency Management Agency)

More from the blog

See the whole blog →